LTC3732CG#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3732 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 60A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~7V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 225kHz~680kHz |
| Input Voltage (Max) | 7V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 750kHz |
| Duty Cycle (Max) | 98.5% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3732CG#TRPBF Overview
It comes in a 36-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 3 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.5V~7V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a 0°C~70°C TA rating. Using this switching controller, it is possible to switch at 225kHz~680kHz. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 36 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "LTC3732". There are a total of 36 pins on switching converter. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 7V. It should be noted that the dc to dc regulator only accepts 7V voltage as input voltage. In most cases, the dc dc regulator's output current is 60A. This information should be noted when you begin working with the component. 750kHz is the maximum frequency of this dc regulators. A dc to dc voltage regulator in the PolyPhase? series, it belongs to this family. Channels are 1 for high-quality communication.
LTC3732CG#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 225kHz~680kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3732CG#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3732CG#TRPBF DC to DC converter applications.
- Digital precision reference circuits
- Various precision measuring detectors
- USB circuits
- Wide-range voltage regulation circuits
- Alternators
- Electric heating, lighting
- Terrestrial set-top boxes
- PSRR circuits
- Telecommunications equipment
- Lathes
