LTC3736EGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3736 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.75V~9.8V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 300kHz~750kHz |
| Input Voltage (Max) | 9.8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 825kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3736EGN-1#TRPBF Overview
With a 24-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 2 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 2.75V~9.8V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. There is a switch at 300kHz~750kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 24 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 4.2V. Other relevant dc to dc converter ics will be returned if you search "LTC3736". There are 24 pins on switching converter. It should be fully noted that the dc to dc regulator only accepts 9.8V input voltage at most. There is a maximum frequency of 825kHz on this dc regulators. A maximum value of 1A is output for current. Channels are 1 for high-quality communication.
LTC3736EGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz~750kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3736EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3736EGN-1#TRPBF DC to DC converter applications.
- Automatic testing equipment
- Adjustable voltage or current linear circuits
- Linear guide
- Automation technology
- Shearing machines
- Nuclear power plants
- Energy management systems
- Hydraulic presses
- Medical equipment
- Gear/thread machining machines
