LTC3736EUF-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3736 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 9.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.75V~9.8V |
| Control Features | Current Limit, Enable, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 300kHz~750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 825kHz |
| Max Duty Cycle | 100 % |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3736EUF-2#PBF Overview
Capsuled in the 24-WFQFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). A 2.75V~9.8V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 300kHz~750kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Power Good, Soft Start, Tracking which allows efficient switching control. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . A variety of terminations with 24 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 4.2V. LTC3736 can be searched for other relevant dc to dc converter ics. 24 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 9.8V. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. DC regulator has a maximum frequency of 825kHz. As a result, switching converter outputs current to the greatest value possible (1A). It is recommended that there be 1 channels for high-quality communication.
LTC3736EUF-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz~750kHz
Current Limit, Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LTC3736EUF-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3736EUF-2#PBF DC to DC converter applications.
- Television equipment
- Radio equipment
- Serial communication converter
- Flaw detection equipment
- Product burn-in
- Electric water heaters
- Telecommunications equipment
- Domestic water pumps
- Injection molding machinery
- Industrial robots
