LTC3736EUF#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3736 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.75V~9.8V |
| Control Features | Current Limit, Enable, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz~750kHz |
| Input Voltage (Max) | 9.8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3736EUF#PBF Overview
The switching controller fits in the 24-WFQFN Exposed Pad package and is ideal for most applications. For 2 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). 2.75V~9.8V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at 300kHz~750kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Power Good, Soft Start, Tracking. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at QUAD. An array of 24 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 4.2V. You can find other relevant dc to dc converter ics by searching "LTC3736". There are a total of 24 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 600mV. Considering the dc to dc regulator can only accept 9.8V input voltage, it is important to take note of this. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. Switching controller operates at 750kHz Hz. There are 1 channels for high-quality communication.
LTC3736EUF#PBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz~750kHz
Current Limit, Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 750kHz
LTC3736EUF#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3736EUF#PBF DC to DC converter applications.
- USB circuits
- Planers
- Communication system
- Medical equipment
- Geothermal power
- Linear guide
- Constant current circuits
- Die casting equipment
- PSRR circuits
- Energy management systems
