LTC3737EGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3737 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.75V~9.8V |
| Control Features | Current Limit, Enable, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz~750kHz |
| Input Voltage (Max) | 9.8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3737EGN#PBF Overview
It comes in the 24-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 2.75V~9.8V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. In this switching controller, the switch can be set to 300kHz~750kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Current Limit, Enable, Power Good, Soft Start, Tracking is included in the dcdc regulator. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 24 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 4.2V is input. Search for "LTC3737" to find other relevant dc to dc converter ics. Pins number 24 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. As determined by the test statistics, the output voltage of DC regulator is 10V. Voltages 9.8V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. The switching controller works at a frequency of 750kHz. It is recommended that there be 1 channels for high-quality communication.
LTC3737EGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz~750kHz
Current Limit, Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 750kHz
LTC3737EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3737EGN#PBF DC to DC converter applications.
- SMT equipment
- Network technology
- Flexible manufacturing cells
- Product testing
- Textile machinery
- Production lines
- Constant current circuits
- Hydro power
- Magnetohydrodynamic power
- Smoke exhaust equipment
