LTC3770EG#PBF
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3770 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 32V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4V~32V |
| Control Features | Current Limit, Enable, On Time Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
LTC3770EG#PBF Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 4V~32V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control, Power Good, Soft Start, Tracking. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 28. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC3770 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 28. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. According to the test statistics, DC regulator outputs 32V voltage. It's important to remember that the dc dc regulator's normaloutput current is 4A, so you should note it down when starting a new project. DC regulator1MHz has the maximum frequency.
LTC3770EG#PBF Features
Transistor Driver Outputs
Current Limit, Enable, On Time Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3770EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3770EG#PBF DC to DC converter applications.
- Telecommunications equipment
- Machining centers
- Network technology
- Fire elevators
- Milling machines
- ATMs
- Sink circuits
- Scientific research
- Production lines
- Emergency lighting monitoring equipment
