LTC3773EG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 630kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3773 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.3V~36V |
| Control Features | Enable, Power Good, Tracking |
| Max Output Voltage | 5V |
| Topology | Buck |
| Min Input Voltage | 3.6V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz~560kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 98.5% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3773EG#PBF Overview
As a result of 36-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 3 output generation. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. dc controls with 3.3V~36V voltage are supplied and operated. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 220kHz~560kHz position. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Power Good, Tracking. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. 36 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. LTC3773 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 36 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, DC regulator outputs 5V volts. The switching controller works at a frequency of 630kHz. The dc switcher's maximum input voltage is 36V; users must limit it accordingly. Switching controller is necessary to have a supply voltage of 3.6V. Depending on the datasheet, the switching converter can output 5V volts at its peak. Its lowest voltage output is not less than 600mV. For high-quality communication, there are 1 channels.
LTC3773EG#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz~560kHz
Enable, Power Good, Tracking
PULSE WIDTH MODULATION
Frequency: 630kHz
LTC3773EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3773EG#PBF DC to DC converter applications.
- Product burn-in
- Computer application technology
- Drilling machines
- Electrical power transmission
- Machining centers
- Flexible manufacturing cells
- Various precision measuring instruments
- Terrestrial set-top boxes
- Gear/thread machining machines
- Current source circuits
