LTC3774EUHE#PBF
| Parameters | |
|---|---|
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3774 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz~1.2MHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 98 % |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
LTC3774EUHE#PBF Overview
As a result of 36-WFQFN Exposed Pad compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. PWM Signal dc switching's outputs (s) can be handled by it. A 4.5V~38V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 150kHz~1.2MHz. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . Different dc switching's functions can be applied to 36 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Search for "LTC3774" to find other relevant dc to dc converter ics. Switching converter has a total of 36 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. The dc to dc regulator can only accept a maximum input voltage of 38V. If you start a project, note down the dc dc regulator's usual output current of 25A. The maximum duty cycle of this voltage regulator dc to dc is set to 98 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. To better satisfy the need, DC to DC voltage regulator has a value of OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT. There are several dc to dc voltage regulator in the PolyPhase? series.
LTC3774EUHE#PBF Features
PWM Signal Outputs
Switching Frequency: 150kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT
LTC3774EUHE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3774EUHE#PBF DC to DC converter applications.
- Program control systems
- Communication system
- Pipe bending machines
- Telecommunications equipment
- Imported equipment
- Bending machines
- Automatic plug-in machines
- Scientific research
- Computer rooms
- Servo drive system
