LTC3775EUD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3775 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 30.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~1MHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 90% |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3775EUD#TRPBF Overview
It comes in the 16-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4.5V~38V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 250kHz~1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at QUAD . A variety of 16 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3775". 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. A 30.4V voltage of DC regulator was detected in the test statistics. At most, the dc to dc regulator accepts 38V input voltage. DC regulator1MHz has the maximum frequency. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V. It belongs to the PolyPhase? series of dc to dc voltage regulator.
LTC3775EUD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V
LTC3775EUD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3775EUD#TRPBF DC to DC converter applications.
- Flaw detection equipment
- Wide-range voltage regulation circuits
- Injection molding machinery
- Large fire protection systems
- Direct power supply system
- Thermal power
- Motor controller circuits
- Precision electronic equipment
- Alternators
- Computed tomography (CT)
