Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
PolyPhase® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LTC3775 |
Function |
Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Voltage |
5.2V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
12V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Voltage - Supply (Vcc/Vdd) |
4.5V~38V |
Control Features |
Current Limit, Enable, Frequency Control, Soft Start |
Input Voltage (Min) |
4.5V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
250kHz~1MHz |
Input Voltage (Max) |
38V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
1MHz |
Duty Cycle (Max) |
90% |
Length |
4.039mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
LTC3775IMSE#TRPBF Overview
With its 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~38V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 250kHz~1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 16 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "LTC3775". Total pins of switching converter are 16. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 5.2V voltage. It should be fully noted that the dc to dc regulator only accepts 38V input voltage at most. DC regulator has a maximum frequency of 1MHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V so that DC to DC voltage regulator better serves the purpose. The dc to dc voltage regulator belongs to the PolyPhase? series.
LTC3775IMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V
LTC3775IMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3775IMSE#TRPBF DC to DC converter applications.
- Various CNC machine tools
- Remotely powered electric motors
- Wind power
- Driver circuits
- Program control systems
- Medical monitoring systems
- Computer rooms
- Surge protection circuits
- Industrial controllers
- Sink circuits