LTC3780IG#PBF
| Parameters | |
|---|---|
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 200kHz~400kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OUTPUT VOLTAGE ADJUSTABLE 0.8 TO 30V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3780 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
LTC3780IG#PBF Overview
The switching controller fits in the 24-SSOP (0.209, 5.30mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4V~30V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 200kHz~400kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Power Good, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. There are many different types of terminations for 24. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3780". Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. The dc to dc regulator can only accept a maximum input voltage of 36V. As a result, DC to DC voltage regulator has a value of ALSO OUTPUT VOLTAGE ADJUSTABLE 0.8 TO 30V so that the need can be met more directly. The output of this function is the greatest value of 3A.
LTC3780IG#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~400kHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OUTPUT VOLTAGE ADJUSTABLE 0.8 TO 30V
LTC3780IG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3780IG#PBF DC to DC converter applications.
- Sensitive electronic devices
- Scientific testing
- CMM
- Domestic water pumps
- Refrigerators of central air conditioners
- Flaw detection equipment
- Machining centers
- Printing equipment
- Smoke prevention equipment
- Handheld GPS
