LTC3780IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OUTPUT VOLTAGE ADJUSTABLE 0.8 TO 30V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3780 |
| JESD-30 Code | S-PQCC-N32 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 200kHz~400kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3780IUH#PBF Overview
The switching controller fits in the 32-WFQFN Exposed Pad package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 4V~30V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. A switching controller such as this can switch at a value of 200kHz~400kHz . The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Power Good, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. An array of 32 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 15V nominal DC switcher's voltage input. LTC3780 can be searched for other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OUTPUT VOLTAGE ADJUSTABLE 0.8 TO 30V. 3A is the largest value switching converter outputs.
LTC3780IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~400kHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OUTPUT VOLTAGE ADJUSTABLE 0.8 TO 30V
LTC3780IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3780IUH#PBF DC to DC converter applications.
- Network technology
- Pipe bending machines
- Nuclear power plants
- Boring machines
- Printing
- Scientific testing
- Combined machine tools
- Household control circuits
- Power supplies of electronic gadgets
- Servo drive system
