LTC3783EDHD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATES AT CURRENT MODE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 20kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3783 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Max Output Current | 1mA |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Output Current | 1A |
| Max Output Voltage | 9.3V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Switching Frequency | 1MHz |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3783EDHD#PBF Overview
The 16-WFDFN Exposed Pad package conserves board space. LED drivers designed using this technology use 1 outputs.It is mounted using Surface Mount.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.It is capable of working normally at -40°C~125°C TJ.20kHz~1MHz is the frequency in which it operates.For its operation, terminations with a value of 0 are used.This LED driver is configured with a base of 16 pins.It's under the LTC3783 base part number.It is acceptable for the supply voltage to be 36V.The device has a pin count of 16.A minimal input voltage of 3V is required for it to operate.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.The maximum supply current is reached when 36V is reached.There is no current that can be supplied to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 1MHz.The maximum output current of 1mA allows it to deliver all benefits of a LED driver.It has a voltage of 7V.It is important to keep the output voltage below 9.3V.When using the device, there is a voltage of 12V volts assigned to the circuit.In addition, this LED driver has a IT CAN ALSO OPERATES AT CURRENT MODE characteristic.
LTC3783EDHD#PBF Features
Available in the 16-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 20kHz~1MHz
Switching frequency of 1MHz
Output voltage of 7V
IT CAN ALSO OPERATES AT CURRENT MODE
LTC3783EDHD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3783EDHD#PBF LED Driver ICs applications.
- Stage and Studio lighting
- Refrigeration lighting
- Gallery lighting
- Panel lighting
- LED Lightings for Inspection Devices
- Linear fluorescent
- Down lights
- OLED power supply for portable equipment
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
