LTC3783EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATES AT CURRENT MODE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 20kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3783 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Output Current | 1A |
| Max Supply Current | 1.5mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Max Duty Cycle | 97 % |
| Dimming | Analog, PWM |
| Switching Frequency | 1MHz |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3783EFE#PBF Overview
The 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used for saving board space. As part of the design of this LED driver, there are 1 outputs that have been used.As far as mounting is concerned, Surface Mount is adopted.It emerges as a DC DC Controller, which is efficient and reliable.The led light driver operates normally at -40°C~125°C TJ. In this case, the frequency is 20kHz~1MHz.It is designed to work with 16 terminations.Its configuration is based on 16 pins.It is under the base part number LTC3783 that the LED driver can be found.It is acceptable to have a maximum voltage of 36V.On this device, there are 16 pins.This device operates with a minimum input voltage of 3V volts.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.It reaches 36V when the maximum supply current is allowed.When the maximum supply current is less than 1.5mA, this device is able to provide high efficiency.It is possible to supply the load with 1A current.There is 24V internal voltage required to power systems.It's possible for this electronic component to fully function when the switching frequency is maintained at 1MHz.7V is the voltage at the output terminal.The circuit is assigned 12V volts when the device is in operation.Moreover, this LED driver is characterized by IT CAN ALSO OPERATES AT CURRENT MODE.
LTC3783EFE#PBF Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 20kHz~1MHz
Operating with the supply voltage of 24V
Switching frequency of 1MHz
Output voltage of 7V
IT CAN ALSO OPERATES AT CURRENT MODE
LTC3783EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3783EFE#PBF LED Driver ICs applications.
- LED headlights
- Down lights
- Auxiliary lights for on-vehicle cameras
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Linear fluorescent
