LTC3784EUFD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OUTPUT VOLTAGE IS ADJUSTABLE UPTO 60V |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3784 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~60V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Max Output Voltage | 60V |
| Topology | Boost |
| Min Input Voltage | 2.3V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Max Input Voltage | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 96 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3784EUFD#PBF Overview
Capsuled in the 28-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. A 4.5V~60V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 105kHz~760kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at QUAD. A variety of terminations with 28 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "LTC3784". Switching converter has a total of 28 pins. As determined by the test statistics, the output voltage of DC regulator is 60V. You should note that the dc dc regulator's usual output current is 25A. A duty cycle set at 96 % ensures voltage regulator dc to dc reliability during power-on and power-off. In order to satisfy the need, DC to DC voltage regulator has a value of OUTPUT VOLTAGE IS ADJUSTABLE UPTO 60V. A dc to dc voltage regulator in the PolyPhase? series, it belongs to this family. The dc switcher's maximum input voltage is 60V, so users must limit the voltage accordingly. The supply voltage must be 2.3V. A datasheet states that the switching converter can output 60V volts at its maximum.
LTC3784EUFD#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
OUTPUT VOLTAGE IS ADJUSTABLE UPTO 60V
LTC3784EUFD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3784EUFD#PBF DC to DC converter applications.
- Electric water heaters
- Low output voltage switching power supply circuits
- Hydrogen power
- Printing equipment
- Solar power plants
- Correction machines
- Automatic testing equipment
- USB circuits
- Textile machinery
- Power supplies of electronic gadgets
