LTC3786EMSE#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3786 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Length | 4.039mm |
| Width | 3mm |
LTC3786EMSE#PBF Overview
As a result of 16-TFSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~38V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at 105kHz~760kHz. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 12V is input. LTC3786 can be searched for other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. Based on the test statistics, DC regulator outputs voltage 5.4V. Voltages 38V are the maximum that the dc to dc regulator will accept. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V in order to better satisfy the requirement.
LTC3786EMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V
LTC3786EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3786EMSE#PBF DC to DC converter applications.
- Machining centers
- Sensitive electronic devices
- Television equipment
- Automation technology
- Terrestrial set-top boxes
- Access control systems
- Remotely powered electric motors
- Boring machines
- Imported equipment
- Printing equipment
