LTC3786EUD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3786 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3786EUD#PBF Overview
It comes in a 16-WFQFN Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). dc controls with 4.5V~38V voltage are supplied and operated. Worked in a -40°C~125°C TJ dc switcher before. Switching can be done at 105kHz~760kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. 16 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Searching "LTC3786" will return other relevant dc to dc converter ics. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.4V. The dc to dc regulator can only accept a maximum input voltage of 38V. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V so that the need can be met more directly.
LTC3786EUD#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V
LTC3786EUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3786EUD#PBF DC to DC converter applications.
- ATMs
- Lathes
- Surge protection circuits
- USB circuits
- Motor controller circuits
- Hydraulic presses
- Balance equipment
- Production lines
- CNC system
- Smart grid
