LTC3787IGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS OUTPUT VOLTAGE UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3787 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3787IGN#TRPBF Overview
As a result of 28-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 2 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~38V. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 105kHz~760kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 28 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3787". There are a total of 28 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Test statistics indicate DC regulator outputs 60V voltage. It should be noted that the dc to dc regulator only accepts 38V voltage as input voltage. The max frequency of the pmic can reach 850kHz. DC to DC voltage regulator has a value of ALSO HAS OUTPUT VOLTAGE UP TO 60V to better satisfy the need. It belongs to the dc to dc voltage regulator series PolyPhase?. Communication on 1 channels is high-quality.
LTC3787IGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO HAS OUTPUT VOLTAGE UP TO 60V
LTC3787IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3787IGN#TRPBF DC to DC converter applications.
- Drilling machines
- Electric water heaters
- Hydro power
- Fire elevators
- Digital video recorders
- Energy management systems
- Mobile phones
- Product burn-in
- Pipe bending machines
- Series voltage regulation circuits
