Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
28-WFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
28 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
PolyPhase® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO HAS OUTPUT VOLTAGE UP TO 60V |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
225 |
Terminal Pitch |
0.5mm |
Base Part Number |
LTC3787 |
Function |
Step-Up |
Number of Outputs |
2 |
Output Voltage |
60V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
12V |
Number of Channels |
1 |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Voltage - Supply (Vcc/Vdd) |
4.5V~38V |
Control Features |
Current Limit, Enable, Frequency Control, Power Good, Soft Start |
Input Voltage (Min) |
4.5V |
Topology |
Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
105kHz~760kHz |
Input Voltage (Max) |
38V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PHASE-SHIFT |
Max Frequency |
850kHz |
Duty Cycle (Max) |
96% |
Clock Sync |
No |
Height Seated (Max) |
0.8mm |
Length |
5mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LTC3787IUFD#TRPBF Overview
Capsuled in the 28-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~38V. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 105kHz~760kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . A variety of terminations with 28 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "LTC3787". The switching converter has a total of 28 pins. Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. A 60V voltage of DC regulator was detected in the test statistics. It should be noted that the dc to dc regulator only accepts 38V voltage as input voltage. It is estimated that this dc regulatorhas a maximum frequency of 850kHz. Hence, ALSO HAS OUTPUT VOLTAGE UP TO 60V is used to better suit the DC to DC voltage regulator's situation. A dc to dc voltage regulator in the PolyPhase? series, it belongs to this family. It is recommended that there be 1 channels for high-quality communication.
LTC3787IUFD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO HAS OUTPUT VOLTAGE UP TO 60V
LTC3787IUFD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3787IUFD#TRPBF DC to DC converter applications.
- Communication system
- SMT equipment
- Product burn-in
- Smoke prevention equipment
- Flaw detection equipment
- Industrial controllers
- Remotely powered electric motors
- Boring machines
- Experimental setup
- Series voltage regulation circuits