LTC3788EUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS OUTPUT VOLTAGES UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3788 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3788EUH#TRPBF Overview
It comes in a 32-WFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 4.5V~38V. Work well in dc switchers with a -40°C~125°C TJ. There is a switch at 105kHz~760kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. A variety of 32 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. A search for "LTC3788" will reveal other relevant dc to dc converter ics. In total, switching converter has 32 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 4.5V. Based on the test statistics, DC regulator outputs voltage 60V. This dc to dc regulator accepts only 38V input voltage at most. DC regulator's maximum frequency is 850kHz. The value of DC to DC voltage regulator is set to ALSO HAS OUTPUT VOLTAGES UP TO 60V in order to better satisfy the requirement. The number of channels available for high-quality communication is 1.
LTC3788EUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO HAS OUTPUT VOLTAGES UP TO 60V
LTC3788EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3788EUH#TRPBF DC to DC converter applications.
- Alternators
- Digital video recorders
- Milling machines
- Smart grid
- Communication system
- Solar power plants
- Smoke exhaust equipment
- Game consoles
- CNC system
- Mobile phones
