LTC3788IGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS OUTPUT VOLTAGES UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3788 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3788IGN-1#PBF Overview
It comes in a 28-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 2 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). 4.5V~38V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the 105kHz~760kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 28 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "LTC3788". The switching converter has a total of 28 pins. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, the DC regulator outputs 60V voltage. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. There is a maximum frequency of 850kHz for this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO HAS OUTPUT VOLTAGES UP TO 60V so that the need can be met more directly. There are 1 channels for high-quality communication.
LTC3788IGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO HAS OUTPUT VOLTAGES UP TO 60V
LTC3788IGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3788IGN-1#PBF DC to DC converter applications.
- Constant current circuits
- Gear/thread machining machines
- Plate bending machines
- Ball screw pair
- Energy management systems
- Product burn-in
- Correction machines
- Program control systems
- Solar power plants
- Scientific testing
