LTC3788IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS OUTPUT VOLTAGES UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3788 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3788IUH#PBF Overview
With its 32-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 2 outputs. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~38V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 105kHz~760kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. QUAD are the position of the terminal of the switching converters. A variety of terminations with 32 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. LTC3788 can be searched for other relevant dc to dc converter ics. 32 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 60V. Considering the dc to dc regulator can only accept 38V input voltage, it is important to take note of this. There is a maximum frequency of 850kHz on this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO HAS OUTPUT VOLTAGES UP TO 60V so that the need can be met more directly. Communication with high quality requires 1 channels.
LTC3788IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO HAS OUTPUT VOLTAGES UP TO 60V
LTC3788IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3788IUH#PBF DC to DC converter applications.
- Grinders
- Machining centers
- Communication system
- Scientific testing
- Elevator lighting
- Die casting equipment
- Constant current circuits
- Printing equipment
- Power supplies of electronic gadgets
- Balance equipment
