LTC3803ES6-3#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.95mm |
| Base Part Number | LTC3803 |
| Function | Step-Up/Step-Down |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 5.7V~8V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 7V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 8.3V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 330kHz |
| Max Duty Cycle | 80 % |
| Number of Output Phases | 1 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LTC3803ES6-3#TRMPBF Overview
With its SOT-23-6 Thin, TSOT-23-6 package, the switching controller fits the needs of most applications. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 5.7V~8V. Qualified to work in a -40°C~125°C TJ dc switcher. There is a switch at 300kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Current Limit, Enable is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 6 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 8V. Searching "LTC3803" will return other relevant dc to dc converter ics. Pins number 6 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 7V. It should be fully noted that the dc to dc regulator only accepts 8.3V input voltage at most. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. voltage regulator dc to dcs with a 80 % duty cycle are designed to be reliable when powered on and powered off. DC regulator330kHz has the maximum frequency. There are 1 phases in this controller.
LTC3803ES6-3#TRMPBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LTC3803ES6-3#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3803ES6-3#TRMPBF DC to DC converter applications.
- Geothermal power
- Driver circuits
- Drilling machines
- Mobile phones
- Milling machines
- Electric water heaters
- Terrestrial set-top boxes
- Window air conditioners
- Servo drive system
- Television equipment
