LTC3803ES6-5#TRMPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3803 |
| Function | Step-Up/Step-Down |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4V~8.1V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 4.9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 5.7V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 230kHz |
| Max Duty Cycle | 80 % |
| Number of Output Phases | 1 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
LTC3803ES6-5#TRMPBF Overview
As a result of SOT-23-6 Thin, TSOT-23-6 compact design, the switching controller is compatible with most applications. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 4V~8.1V. Worked in a -40°C~125°C TJ dc switcher before. The switching controller is capable of switching at the 200kHz position. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. A variety of 6 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Other relevant dc to dc converter ics will be returned if you search "LTC3803". Pins number 6 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 4.9V. This dc to dc regulator accepts only 5.7V input voltage at most. You should note down the dc dc regulator's usual output current of 1A when you start a project. voltage regulator dc to dcs with a 80 % duty cycle are designed to be reliable when powered on and powered off. 230kHz is the maximum frequency of this dc regulators. Switching with 1 phases is the property of this controller.
LTC3803ES6-5#TRMPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LTC3803ES6-5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3803ES6-5#TRMPBF DC to DC converter applications.
- Servo drive system
- Product testing
- Electrical power transmission
- Flaw detection equipment
- Program control systems
- Linear guide
- Household control circuits
- Various precision measuring detectors
- Electrical distribution systems
- Magnetohydrodynamic power
