LTC3803IS6#TRMPBF
| Parameters | |
|---|---|
| Switcher Configuration | SINGLE |
| Max Frequency | 240kHz |
| Duty Cycle (Max) | 80% |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3803 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Output Current | 2A |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 5.7V~8V |
| Control Features | Current Limit, Enable |
| Max Output Voltage | 5V |
| Topology | Flyback |
| Min Input Voltage | 36V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Max Input Voltage | 72V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
LTC3803IS6#TRMPBF Overview
As a result of SOT-23-6 Thin, TSOT-23-6 compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. 5.7V~8V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 200kHz position. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Enable. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 6. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 8V. Other relevant dc to dc converter ics will be returned if you search "LTC3803". 6 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. If you start a project, note down the dc dc regulator's usual output current of 1A. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 240kHz for this dc regulators. The maximum input voltage of this dc switcher is 72V, so users must limit the voltage accordingly. 36V is the required supply voltage. An output current greater than 2A cannot be provided by the dc switcher. Datasheets indicate that the switching converter can output 5V volts at its maximum.
LTC3803IS6#TRMPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Enable
PULSE WIDTH MODULATION
LTC3803IS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3803IS6#TRMPBF DC to DC converter applications.
- Computed tomography (CT)
- Emergency lighting monitoring equipment
- Flaw detection equipment
- Printing equipment
- Industrial controllers
- Current source circuits
- Scientific research
- Electric water heaters
- Packaging
- Game consoles
