LTC3805EDD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT ALSO OPERATES WITH 36V TO 76V WITH AN EXTERNAL RESISTOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3805 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 3.95V~9.5V |
| Control Features | Enable, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 70kHz~700kHz |
| Input Voltage (Max) | 9V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 700kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3805EDD#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 10-WFDFN Exposed Pad package. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 3.95V~9.5V. Qualified to work in an dc switcher with -40°C~85°C TA. There is a switch at 70kHz~700kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 10 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 8V. You can find other relevant dc to dc converter ics by searching "LTC3805". 10 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. A 75V voltage of DC regulator was detected in the test statistics. A maximum voltage of 9V is accepted by the dc to dc regulator as an input voltage. There is a maximum frequency of 700kHz on this dc regulators. As a result, DC to DC voltage regulator has a value of IT ALSO OPERATES WITH 36V TO 76V WITH AN EXTERNAL RESISTOR so that the need can be met more directly.
LTC3805EDD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 70kHz~700kHz
Enable, Soft Start
PULSE WIDTH MODULATION
IT ALSO OPERATES WITH 36V TO 76V WITH AN EXTERNAL RESISTOR
LTC3805EDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3805EDD#TRPBF DC to DC converter applications.
- Scientific research
- Servo drive system
- Mobile phones
- Electric heating, lighting
- Refrigerators of central air conditioners
- Correction machines
- Automation technology
- Digital video recorders
- Radio equipment
- Grinders
