LTC3805HMSE-5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3805 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 3.95V~9.5V |
| Control Features | Enable, Soft Start |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 70kHz~700kHz |
| Input Voltage (Max) | 8.9V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 700kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3805HMSE-5#TRPBF Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. 3.95V~9.5V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~150°C TJ dc switcher before. Switching can be done at 70kHz~700kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 10. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. LTC3805 can be searched for other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 75V voltage. The dc to dc regulator can only accept a maximum input voltage of 8.9V. 700kHz is the maximum frequency of this dc regulators.
LTC3805HMSE-5#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 70kHz~700kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC3805HMSE-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3805HMSE-5#TRPBF DC to DC converter applications.
- Linear guide
- Hydro power
- Industrial controllers
- PSRR circuits
- Plate bending machines
- ATMs
- Ball screw pair
- SMT equipment
- Thermal power
- Flexible manufacturing cells
