LTC3805IDD-5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3805 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 3.95V~9.5V |
| Control Features | Enable, Soft Start |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 70kHz~700kHz |
| Input Voltage (Max) | 8.9V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 700kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3805IDD-5#TRPBF Overview
Capsuled in the 10-WFDFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 3.95V~9.5V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 70kHz~700kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Soft Start provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. The 10 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. Other relevant dc to dc converter ics will be returned if you search "LTC3805". Switching converter has a total of 10 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 75V voltage. A maximum voltage of 8.9V is accepted by the dc to dc regulator as an input voltage. DC regulator's maximum frequency is 700kHz.
LTC3805IDD-5#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 70kHz~700kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC3805IDD-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3805IDD-5#TRPBF DC to DC converter applications.
- Hydraulic presses
- Thermal power
- Large fire protection systems
- Computer monitoring equipment of building
- Plate bending machines
- Wind power
- Adjustable voltage or current linear circuits
- Boring machines
- Balance equipment
- Electrical distribution systems
