LTC3808EGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 9.8V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3808 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 9.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 2.75V~9.8V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 2.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 825kHz |
| Duty Cycle (Max) | 100% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3808EGN#PBF Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 2.75V~9.8V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller can be switched at 250kHz~750kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 4.2V. LTC3808 can be searched for other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.75V. Statistically, the DC regulator outputs 9.8V voltage. You should note down the dc dc regulator's usual output current of 5A when you start a project. 825kHz is the maximum frequency of this dc regulators. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 9.8V.
LTC3808EGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~750kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 9.8V
LTC3808EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3808EGN#PBF DC to DC converter applications.
- Textile machinery
- Communication system
- Household control circuits
- USB circuits
- Current source circuits
- Arc suppression circuits
- Ball screw pair
- Electrical distribution systems
- Elevator lighting
- Drilling machines
