LTC3810EG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3810 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 55.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 6.35V~14V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 6.35V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Switching Frequency | 1MHz |
| Height Seated (Max) | 2mm |
| Width | 5.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3810EG#PBF Overview
It comes in a 28-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 6.35V~14V volts and has 6.35V~14V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 28 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. Other relevant dc to dc converter ics can be found by searching "LTC3810". The switching converter has a total of 28 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 6.35V. Based on the test statistics, DC regulator outputs voltage 55.8V. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 1MHz. When this switching controller is running at frequency 1MHz, it can perform well in most cases.
LTC3810EG#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Switching Frequency: 1MHz
LTC3810EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3810EG#PBF DC to DC converter applications.
- Flexible manufacturing cells
- Analog precision reference circuits
- Thermal power
- Geothermal power
- Electric water heaters
- Medical monitoring systems
- Refrigerators of central air conditioners
- Drilling machines
- Imported equipment
- Planers
