LTC3810EUH-5#TRPBF
| Parameters | |
|---|---|
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle | 99 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3810 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.35V~14V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.35V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
LTC3810EUH-5#TRPBF Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 4.35V~14V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TJ dc switcher before. Surface Mount makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at QUAD . Various 32 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics will be returned if you search "LTC3810". Pins number 32 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.35V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 60V voltage. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. The max frequency of the pmic can reach 1MHz.
LTC3810EUH-5#TRPBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3810EUH-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3810EUH-5#TRPBF DC to DC converter applications.
- Automation technology
- PSRR circuits
- Boring machines
- Printing
- Constant current circuits
- Surface processing equipment
- Plate bending machines
- Linear guide
- Driver circuits
- Alternators
