LTC3812IFE-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3812 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 55.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.35V~14V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.35V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 93 % |
| Length | 5mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LTC3812IFE-5#PBF Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 4.35V~14V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "LTC3812". There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.35V as the minimum input voltage of dc dc voltage regulator. A 55.8V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. This dc regulatorhas a max frequency of 1MHz.
LTC3812IFE-5#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3812IFE-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3812IFE-5#PBF DC to DC converter applications.
- Handheld GPS
- Domestic water pumps
- Grinders
- Motor controller circuits
- Smoke exhaust equipment
- Electrical power transmission
- Flaw detection equipment
- Lathes
- USB circuits
- Digital video recorders
