LTC3823IGN#PBF
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable, On Time Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 36V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 90 % |
| Switching Frequency | 200kHz |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Length | 9.893mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3823 |
| Function | Step-Down |
| Output Voltage | 27V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
LTC3823IGN#PBF Overview
In the 28-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 4.5V~36V. A -40°C~85°C TA dc switcher is not a problem. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable, On Time Control, Power Good, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 28. The DC switcher's nominal voltage is 15V. In addition to "LTC3823", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 28 pins. In particular, switching converter is a type of Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 27V. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. You should note that the dc dc regulator's usual output current is 10A. A duty cycle set at 90 % ensures voltage regulator dc to dc reliability during power-on and power-off. The max frequency of the pmic can reach 1MHz. This controller contains 1 phases. This controller performs best at a frequency of 200kHz.
LTC3823IGN#PBF Features
Transistor Driver Outputs
Enable, On Time Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 90 %
Switching Frequency: 200kHz
LTC3823IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3823IGN#PBF DC to DC converter applications.
- Program control systems
- Flaw detection equipment
- Drilling machines
- Window air conditioners
- Milling machines
- Die casting equipment
- Game consoles
- Hydro power
- Computer-related products
- USB circuits
