LTC3823IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3823 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 27V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable, On Time Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 36V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 90% |
| Switching Frequency | 200kHz |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3823IUH#PBF Overview
With its 32-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. 4.5V~36V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, On Time Control, Power Good, Soft Start, Tracking. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at QUAD. 32 terminations with a variety of function. The nominal DC switcher's voltage input is 15V. LTC3823 can be searched for other relevant dc to dc converter ics. There are a total of 32 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. As determined by the test statistics, the output voltage of DC regulator is 27V. The dc to dc regulator is limited to 36V input voltage. You should note that the dc dc regulator's usual output current is 10A. There is a maximum frequency of 1MHz on this dc regulators. This controller performs best at a frequency of 200kHz.
LTC3823IUH#PBF Features
Transistor Driver Outputs
Enable, On Time Control, Power Good, Soft Start, Tracking
Switching Frequency: 200kHz
LTC3823IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3823IUH#PBF DC to DC converter applications.
- Flexible manufacturing cells
- Hydraulic presses
- Motor controller circuits
- Communication system
- Game consoles
- Industrial controllers
- Wind power
- Packaging
- Computed tomography (CT)
- Electrical distribution systems
