LTC3824HMSE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3824 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 4V~60V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~600kHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 460kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3824HMSE#TRPBF Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. 4V~60V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~150°C TJ. It can switch at 200kHz~600kHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 10 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 12V is input. Search for "LTC3824" to find other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 36V voltage. This dc to dc regulator accepts only 60V input voltage at most. In most cases, the dc dc regulator's output current is 2.5A. This information should be noted when you begin working with the component. 460kHz is the maximum frequency of this dc regulators.
LTC3824HMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3824HMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3824HMSE#TRPBF DC to DC converter applications.
- Cutting machine tools
- Smoke prevention equipment
- Combined machine tools
- Industrial controllers
- Product burn-in
- PSRR circuits
- Milling machines
- Packaging
- Television equipment
- Network technology
