LTC3824IMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3824 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~60V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2.5A |
| Frequency - Switching | 200kHz~600kHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3824IMSE#PBF Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4V~60V and has a 4V~60V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. There is a switch at 200kHz~600kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 10 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3824". Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 4V. The dc to dc regulator can only accept a maximum input voltage of 60V. A value of 2.5A is output as the maximum value of current.
LTC3824IMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3824IMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3824IMSE#PBF DC to DC converter applications.
- Various precision measuring instruments
- seismic instrument power circuits
- USB circuits
- Window air conditioners
- Automation technology
- Electric water heaters
- Flaw detection equipment
- Sink circuits
- Pipe bending machines
- Digital precision reference circuits
