LTC3824MPMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3824 |
| Function | Step-Down |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4V~60V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~600kHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 460kHz |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Number of Output Phases | 1 |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3824MPMSE#PBF Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. A 4V~60V voltage is supplied to the dc control and used for operating it. Suitable for a -55°C~150°C TJ dc switcher. Using this switching controller, it is possible to switch at 200kHz~600kHz. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Frequency Control, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 10 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "LTC3824". Total pins of switching converter are 10. The minimum input voltage of the dc dc voltage regulator should be 4V. Statistically, DC regulator outputs 36V volts. A maximum voltage of 60V is accepted by the dc to dc regulator as an input voltage. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This dc regulatorhas a max frequency of 460kHz. There are 1 phases in this controller.
LTC3824MPMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LTC3824MPMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3824MPMSE#PBF DC to DC converter applications.
- Domestic water pumps
- Computer application technology
- Terrestrial set-top boxes
- Laboratories
- Post equipment
- Various CNC machine tools
- Photovoltaic power
- Industrial controllers
- Wind power
- Automatic plug-in machines
