LTC3826EG-1#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3826 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 585kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
LTC3826EG-1#PBF Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. 2 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. The system can process Transistor Driver dc switching's outputs (s). 4V~36V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. It can switch at 250kHz~530kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start, Tracking. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 28 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. A search for "LTC3826" will reveal other relevant dc to dc converter ics. In total, switching converter has 28 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Test statistics indicate DC regulator outputs 10V voltage. The dc to dc regulator can only accept 36V input voltage. There is a maximum frequency of 585kHz on this dc regulators. The output value is set to the greatest value of 3A. A high-quality communication requires 1 channels.
LTC3826EG-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3826EG-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3826EG-1#PBF DC to DC converter applications.
- Imported equipment
- Domestic water pumps
- Linear guide
- Boring machines
- Nuclear power plants
- Computer-related products
- Grinders
- Bending machines
- PSRR circuits
- USB circuits
