LTC3826EG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3826 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 585kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3826EG-1#TRPBF Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 4V~36V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. This switching controller can switch at 250kHz~530kHz. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Enable, Power Good, Soft Start, Tracking. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. An array of 28 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. Searching "LTC3826" will return other relevant dc to dc converter ics. Pins number 28 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4V. DC regulator outputs 10V voltage based on test statistics. At most, the dc to dc regulator accepts 36V input voltage. This dc regulatorhas a max frequency of 585kHz. A value of 3A is output as the maximum value of current. Channels are 1 for high-quality communication.
LTC3826EG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3826EG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3826EG-1#TRPBF DC to DC converter applications.
- Shearing machines
- Television equipment
- Hydro power
- Computer monitoring equipment of building
- Drilling machines
- Terrestrial set-top boxes
- Alternators
- Flaw detection equipment
- Nuclear power plants
- Automation technology
