LTC3826EUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3826 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 585kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3826EUH#TRPBF Overview
In the 32-WFQFN Exposed Pad package, the switching controller meets most application requirements. It is sufficient to generate 2 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4V~36V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It can switch at 250kHz~530kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start, Tracking. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . There are many different types of terminations for 32. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LTC3826". Switching converter has a total of 32 pins. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. A 10V voltage of DC regulator was detected in the test statistics. Voltages 36V are the maximum that the dc to dc regulator will accept. 585kHz is the maximum frequency of this dc regulators. 3A is the greatest value switching converter outputs as current. The dc to dc voltage regulator belongs to the PolyPhase? series. In order to ensure high-quality communication, there are 1 channels available.
LTC3826EUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3826EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3826EUH#TRPBF DC to DC converter applications.
- Smoke prevention equipment
- Computer rooms
- Bending machines
- Product testing
- Hydraulic presses
- Electrical distribution systems
- Elevator lighting
- seismic instrument power circuits
- Solar power plants
- Pipe bending machines
