LTC3826IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3826 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 585kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3826IUH#PBF Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 4V~36V volts and has 4V~36V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. There is a switch at 250kHz~530kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Power Good, Soft Start, Tracking. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at QUAD. There are many different types of terminations for 32. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Searching "LTC3826" will return other relevant dc to dc converter ics. There are a total of 32 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. 585kHz is the maximum frequency of this dc regulators. 3A is the largest value switching converter outputs. Thare are switch converters of the PolyPhase? series. Communication on 1 channels is high-quality.
LTC3826IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3826IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3826IUH#PBF DC to DC converter applications.
- Special machining machine tools
- Solar power plants
- Grinders
- Experimental setup
- Various precision measuring detectors
- Electrical power transmission
- Correction machines
- Electric heating, lighting
- Electrical distribution systems
- Adjustable voltage or current linear circuits
