LTC3827EG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3827 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3827EG-1#TRPBF Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 4V~36V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. Using this switching controller, it is possible to switch at 250kHz~530kHz. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Power Good, Soft Start, Tracking. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . 28 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 12V. Searching "LTC3827" will return other relevant dc to dc converter ics. 28 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 10V voltage. This dc to dc regulator accepts only 36V input voltage at most. 580kHz is the maximum frequency of this dc regulators. Whenever the current value is 3A, switching converter outputs the highest possible value. There are 1 channels for high-quality communication.
LTC3827EG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3827EG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3827EG-1#TRPBF DC to DC converter applications.
- Ball screw pair
- Die casting equipment
- Automatic testing equipment
- Surface processing equipment
- Electrical power transmission
- Magnetohydrodynamic power
- Experimental setup
- Wide-range voltage regulation circuits
- SMT equipment
- seismic instrument power circuits
