LTC3827IG-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3827 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3827IG-1#PBF Overview
This switching controller fits most application requirements since it is packaged in a 28-SSOP (0.209, 5.30mm Width) package. For 2 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4V~36V voltage are supplied and operated. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at 250kHz~530kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. The 28 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. LTC3827 can be searched for other relevant dc to dc converter ics. Pins number 28 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. 4V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 10V voltage according to the test statistics. The dc to dc regulator can only accept a maximum input voltage of 36V. 580kHz is the maximum frequency of this dc regulators. Switching converter outputs current to the greatest value of 3A. There are 1 channels for high-quality communication.
LTC3827IG-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3827IG-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3827IG-1#PBF DC to DC converter applications.
- Program control systems
- Sensitive electronic devices
- Production lines
- Solar power plants
- Thermal power
- Computer application technology
- Flaw detection equipment
- Pipe bending machines
- Imported equipment
- ATMs
