LTC3827IG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3827 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3827IG-1#TRPBF Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~36V. Work well in dc switchers with a -40°C~85°C TA. There is a switch at 250kHz~530kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Enable, Power Good, Soft Start, Tracking is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 28 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. In addition to "LTC3827", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 28 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Based on the test statistics, DC regulator outputs voltage 10V. This dc to dc regulator accepts only 36V input voltage at most. This dc regulatorhas a max frequency of 580kHz. The output of this function is the greatest value of 3A. It is recommended that there be 1 channels for high-quality communication.
LTC3827IG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3827IG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3827IG-1#TRPBF DC to DC converter applications.
- Production lines
- Textile machinery
- Computed tomography (CT)
- Surge protection circuits
- Magnetohydrodynamic power
- PSRR circuits
- Alternators
- seismic instrument power circuits
- Refrigerators of central air conditioners
- Digital display device
