LTC3827IUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3827 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3827IUH#TRPBF Overview
With its 32-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 2 numbers. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 4V~36V volts and has 4V~36V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. A switching controller such as this can switch at a value of 250kHz~530kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Phase Control, Power Good, Soft Start, Tracking. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . 32 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. In addition to "LTC3827", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 32. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. This dc to dc regulator accepts only 36V input voltage at most. It is estimated that this dc regulatorhas a maximum frequency of 580kHz. As a result, switching converter outputs current to the greatest value possible (3A). The dc to dc voltage regulator belongs to the PolyPhase? series. Communication on 1 channels is high-quality.
LTC3827IUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3827IUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3827IUH#TRPBF DC to DC converter applications.
- Laboratories
- Packaging
- Handheld GPS
- Geothermal power
- Various precision measuring instruments
- Thermal power
- Photovoltaic power
- Special machining machine tools
- Cutting machine tools
- Adjustable voltage or current linear circuits
