LTC3828EG#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3828 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Phase Control, Power Good, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 260kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 590kHz |
| Max Duty Cycle | 99.4 % |
| Clock Sync | No |
| Width | 5.3mm |
| REACH SVHC | No SVHC |
LTC3828EG#PBF Overview
It comes in the 28-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. For 2 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~28V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 260kHz~550kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Phase Control, Power Good, Tracking. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. 28 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. LTC3828 can be searched for other relevant dc to dc converter ics. There are a total of 28 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4.5V. Statistically, the DC regulator outputs 7V voltage. normally, the dc dc regulator's output current is 25A, which you should keep in mind when starting a project. It is set to 99.4 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC regulators have a maximum frequency of 590kHz. It belongs to the dc to dc voltage regulator series PolyPhase?. Channels are 1 for high-quality communication.
LTC3828EG#PBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Enable, Phase Control, Power Good, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 99.4 %
LTC3828EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3828EG#PBF DC to DC converter applications.
- Geothermal power
- Program control systems
- Access control systems
- Hydraulic presses
- Product burn-in
- Motor controller circuits
- Energy management systems
- Low output voltage switching power supply circuits
- Computer application technology
- CNC system
