LTC3828EG#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3828 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Phase Control, Power Good, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 260kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 590kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3828EG#TRPBF Overview
In the 28-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 2 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4.5V~28V and has a 4.5V~28V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at 260kHz~550kHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Phase Control, Power Good, Tracking. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 28 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3828". There are only 28 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 7V voltage. normally, the dc dc regulator's output current is 25A, which you should keep in mind when starting a project. DC regulators have a maximum frequency of 590kHz. The dc to dc voltage regulator is from the PolyPhase? series. Communication on 1 channels is high-quality.
LTC3828EG#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Enable, Phase Control, Power Good, Tracking
PULSE WIDTH MODULATION
LTC3828EG#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3828EG#TRPBF DC to DC converter applications.
- Power supplies of electronic gadgets
- Smart grid
- Machining centers
- Drilling machines
- Various precision measuring detectors
- Access control systems
- Digital precision reference circuits
- Production lines
- Domestic water pumps
- Ball screw pair
