LTC3830ES#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3830 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.28V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 3V~8V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 250kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | No |
| Length | 9.906mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
LTC3830ES#PBF Overview
It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~8V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 200kHz position. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 16 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 5V. A search for "LTC3830" will reveal other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 3V. DC regulator outputs 7.28V voltage based on test statistics. It should be fully noted that the dc to dc regulator only accepts 8V input voltage at most. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. The max frequency of the pmic can reach 250kHz.
LTC3830ES#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3830ES#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3830ES#PBF DC to DC converter applications.
- Pipe bending machines
- Constant current circuits
- Wind power
- Computer application technology
- Program control systems
- Automatic plug-in machines
- Remotely powered electric motors
- Product burn-in
- Production lines
- Lathes
