LTC3833EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3833 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.2MHz |
| Clock Sync | No |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3833EFE#PBF Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~38V. Worked in a -40°C~125°C TJ dc switcher before. With this switching controller, you can switch at 200kHz~2MHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 20 of dc switching. It is inputted with a DC switcher's voltage of 15V. In addition to "LTC3833", there are other relevant dc to dc converter ics you can find. In total, switching converter has 20 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 5.5V voltage based on test statistics. It should be noted that the dc to dc regulator only accepts 38V voltage as input voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. There is a maximum frequency of 2.2MHz for this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V.
LTC3833EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V
LTC3833EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3833EFE#PBF DC to DC converter applications.
- Sink circuits
- Elevator lighting
- Servo drive system
- Domestic water pumps
- Balance equipment
- Packaging
- Industrial controllers
- Digital video recorders
- Printing
- Cutting machine tools
