LTC3833EFE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3833 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.2MHz |
| Clock Sync | No |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3833EFE#TRPBF Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. 4.5V~38V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. A switching controller such as this can switch at a value of 200kHz~2MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Power Good, Soft Start, Tracking. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Various 20 terminations. The DC switcher's nominal voltage is 15V. Searching "LTC3833" will return other relevant dc to dc converter ics. The switching converter has a total of 20 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 5.5V voltage based on test statistics. At most, the dc to dc regulator accepts 38V input voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. It is estimated that this dc regulatorhas a maximum frequency of 2.2MHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V.
LTC3833EFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V
LTC3833EFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3833EFE#TRPBF DC to DC converter applications.
- Adjustable voltage or current linear circuits
- Access control systems
- Production lines
- Elevator lighting
- Product burn-in
- Fire elevators
- Electrical power transmission
- Handheld GPS
- Wide-range voltage regulation circuits
- Digital display device
